complete lens restore in a box electric or air tool
limited time special of the complete solaray lens restoration system in a box. includes sem soap, sem plastic prep, sem solaray headlight repair aerosol, supply of special wipes (50), 20 each of the 9, 15, 30, 60 micron sanding discs, UV curing lamp, backing pad velcro, cushion pad velcro, plus your choice of the variable speed electric polisher or the air tool.
Solaray UV headlight repair
creates a clear, UV cured aerosol coating designed to improve the appearance, clarity and light output of yellowed, hazy or oxidized plastic headlights.
UV curing light for Sem solaray products.
Portable and easy to use. Curing area of light is about 4-5 inches in diameter. Spot cure an area and move thru the repair. You may wand the light over the entire repair, but overall curing time will be extended.
two parts to the light----ballast and lamp housing.
solaray lens restoration kit
Includes the special UV curing light. solaray 21013, sem soap, sem plastic prep, 20 each of 60, 30, 15, and 9 micro sanding discs, special supply of wipes (50).
micron sanding disc
hookit II available in four grades: 9V, 15V, 30V, 60V and 3" disc size.
air tool or electric tool
If you have a compressor, purchase the mini Hutchins palm sander. If you do not have a compressor or want to be mobile, purchase the electric variable speed polisher/sander. both come with a backing plate and cushion pad.
you have your choice of: gray, green, and red scrub pads 3" x 4 and 1/2"
Recommended steps for lens restore: wash surface with sem soap using a gray pad. rinse with water & dry. clean with plastic/leather prep. wet sand (dry optional) starting with 60 or 30 micron sanding disc to remove factory coating and then wet sand (dry optional) with 15 or 9 micron sanding disc to remove any sand scratches. re-clean with plastic/leather prep (use de-wipes also) and allow to dry. mask off area to protect from overspray. shake solaray can well and spray 2 coats allowing a 2 minute flash time between coats. allow 2nd coat to flash 5 minutes before exposing to UV light. cure at a distance of 1-2" for 2 minutes.