directions for recoloring “soft vinyl” with Sem Color Coat. clean first with Sem soap --- squeeze out a bead of Sem Soap over area; spray on some water; scrub with green pad and wipe dry with lint free towel. clean second with Sem WB vinyl prep  (Sem surface cleaner #3838 can also be used)--- spray on and scrub with green pad; wipe dry with lint free towel.  Sem recommends rinsing with water at this point.

 (If using aerosols, spray at a cooler time of the day and when there is low humidity to avoid spraying problems.) 

put paint into spray container adding 5-10% vinyl retarder to help increase adhesion and give paint a better “flow” and spray in light coats. 

for dashboard type material --- prep with Sem sand free prior to recoloring. 

for hard plastic --- Sem recommends cleaning with Sem scuff & clean and plastic prep --- prior to recoloring, prep with Sem plastic adhesion promoter or XXX adhesion promoter for all surfaces.