Speed Cut Cutting Compound

Key Features:

• Ultra-fast cutting compound.
• Removes 1200 grit or finer sanding marks.
• Great for removing scratches, acid rain, severe swirls and holograms.

Directions:

For best results, use on clean, cool paint and out of direct sunlight.

Clean pad frequently using pad conditioner brush or compressed air using regulatory approved air nozzle.

Removing 1,500 ~ 2,500 Grit Wet Sanding Marks-

1. Apply Speed Cut Cutting Compound uniformly to Microbuff Cutting Pad.
2. Buff at 4800 opm, working a 2’ x 2’ section.
3. Wipe residue off using a soft, clean microfiber towel.
4. Next use Nano Cut Finishing Compound with the same Microbuff Cutting Pad at 3800 - 4800 opm.
5. Make your own choice for finishing:
6. Apply Formula 67 Professional Quick Detailer with Microbuff Polishing Pad to add a layer of wax and restore showroom gloss. (Speed 3800 opm)
7. Apply Seal Nano Perfect Sealant with Microbuff Finishing Pad to remove gloss-hindering defects while leaving a durable layer of paint protection behind. (Speed 3800 opm)

Removing 2,500 ~ 3,000 Grit Wet Sanding Marks or Finer Scratches-

1. Apply Nano Cut Finishing Compound uniformly to Microbuff Cutting Pad.
2. Buff at 4800 opm, working a 2’ x 2’ section.
3. Wipe residue off using a soft, clean microfiber towel.
4. Make your own choice for finishing:
5. Apply Formula 67 Professional Quick Detailer with Microbuff Polishing Pad to add a layer of wax and restore showroom gloss. (Speed 3800 opm)
6. Apply Seal Nano Perfect Sealant with Microbuff Finishing Pad to remove gloss-hindering defects while leaving a durable layer of paint protection behind. (Speed 3800 opm)

SDS